Complete 6 Band Antenna (6, 10, 12, 15, 17, and 20).
Complete Antenna includes:
Complete Base Plate
Air Coax center post
Spreader Arms
Wire kits for 6M, 10M, 12M, 15M, 17M, and 20M
Support cords
Click here for assembly instrucitons.
If you do not already have a Balun Don't forget to get one (item below)
$700.00 Shipping Included
I am currenlty working my way through backorders(currently a 3 week lead time). Orders will be shipped out in the order in which payment is received.
1:1 Current Balun Kit
For RG8, LMR400, or similar cable.
Order this Balun if you do not already have connectors on your feed line.
$29.00 Shipping Included if purchased with the antenna
1:1 Current Balun Kit with Split Beads
For RG8, LMR400, or similar cable.
Order this Balun if you already have connectors on your feed line.
Click here for a video of Split Bead Balun Installation.
$40.00 Shipping Included if purchased with the antenna
1:1 Current Balun Kit with Split Beads
For RG8x.
Order this Balun if you already have connectors on your feed line.
Click here for a video of Split Bead Balun Installation.
$38.00 Shipping Included if purchased with the antenna
Ice Cords
Set of 6 cords with hardware. These are installed in addition to the standard support cords. They connect from the top of the center post to half way down the spreadder arms. They provide additional support to couteract the weight of accumulated ice and snow.
$38.00 Shipping Included if purchased with the antenna
PL259 - SO239
UHF-male / UHF-female, Teflon dielectric, Gold-plated pin, and Silver-plated body, Right Angle
$8.00 Shipping Included if purchased with the antenna
Wires for 6, 10, 12, 15, 17, and 20. Pre cut and preassembled. All you have to do is string them through the rings on your spreader poles and attach to your center post.
$175.00
Shipping included
6M Element
Pre cut and preassembled. All you have to do is string it through the rings on your spreader poles and attach to your center post.
$25.00
Shipping included
10M Element
Pre cut and preassembled. All you have to do is string it through the rings on your spreader poles and attach to your center post.
$31.00
Shipping included
12M Element
Pre cut and preassembled. All you have to do is string it through the rings on your spreader poles and attach to your center post.
$32.00
Shipping included
15M Element
Pre cut and preassembled. All you have to do is string it through the rings on your spreader poles and attach to your center post.
$35.00
Shipping included
17M Element
Pre cut and preassembled. All you have to do is string it through the rings on your spreader poles and attach to your center post.
$38.00
Shipping included
20M Element
Pre cut and preassembled. All you have to do is string it through the rings on your spreader poles and attach to your center post.
$44.00
Shipping included
Mast And Mast Parts
2" Receiver Hitch Mast Holder
2.5" Aluminum pipe to hold a push up pole. Designed to slide into a atandard 2" receiver hitch.